Baumfolder 714XA - Manual (Page 24)

PAGE 21 TP10583
25. Fold Pan Adjustment Screen:
To access the adjustment screen, start from the production screen. Press either of the numbers on the left side
of the screen that indicate current position of pan 1 and pan 2.
On the adjustment screen pressing either the
“+
“or
“–
“button should move the pan immediately by .01”.
The status indicator will change to the pan moving status while the pan is moving and return to the “ready status”
after the movement is complete. The adjustment screen is meant to correct for small changes in the pans posi-
tion. A double move is required to move small distances. You can watch the pan move towards the fold roll,
then away from the fold rolls. The + and - buttons will disappear while the pans are moving and then reappear
after the second move is complete.
26. Fold Pan Direct Entry Screen:
To access the direct entry screen, start from the production screen, press either one of the numbers on the left
side of the screen that show the current position of pan 1 and pan 2.
That should move to the adjustment screen. From the adjustment screen, press the direct entry button:
This screen will only move the pans if the movement requested is at least 0.1 inch or greater. Enter the new
numeric value, then press the pan number below the new value to initiate the movement.
If less than 0.1 movement is required, press the blue button to return to the adjustment screen.