ClearCube R-Series Data Center Products - Manual (Page 35)

R-Series Data Center Products User’s Guide Network Planning and Site Preparation • 11
Chapter 2. Network Planning and
Site Preparation
Rack and Cabinet Requirements
Before installing the components of the ClearCube Architecture it is very important to
properly prepare the site where you will install the chassis and PC blades. This chapter
provides important information on how to plan for installation.
Figure 10 Standard 19-Inch Rack and Standard 19-Inch Cabinet
Figure 10 shows two frequently-used structures for holding ClearCube chassis. A
standard 42U rack or cabinet can hold as many as 14 chassis.
CAUTION: Equipment racks and cabinets can become highly unstable if not
adequately secured. Please read and follow the manufacturer's
specifications and recommendations for mounting instructions. Additional
ClearCube guidelines are provided throughout this section that—with the
manufacturer's requirements—will ensure a safe installation.