CTL Confirm-IT2 - Manual (Page 24)

Message Recording Using the GUI
20
Figure 19 Using the Record Button to Record a Message
TO RECORD
After entering a file name, click anywhere on the screen to activate the Play/Pause/Stop/Record
control bar. Click the Record button to begin recording into the microphone. When finished,
press the Stop button.
IMPORTANT NOTE!! If you selected an existing Wav File using the Browse button, you
will record over that existing file!
TO PLAY
Click the Play button to hear the recorded message through the PC speakers.
TO SAVE
Click the appropriate Save Recording button on the right side of the screen. A
red asterisk will
appear to the left of the save button and the button will be dimmed to indicate the message was
saved. This only saves the recording as a temporary local file.
The recording is not permanently uploaded and saved to the Confirm-IT server until the
lower left Save button is clicked on one of the options screens. You can move between
Tabs and select other Options types and a message box will remind you that the upload
save to the server has not been done.
Play Pause Stop Record