CTL Confirm-IT2 - Manual (Page 6)

Getting Started
2
Figure 1 Confirm-IT2 “Yesterday and Today’s Appointments Main Screen
GETTING STARTED, “The Basics”
Assumptions
After the software has been installed on the Confirm-IT2 user’s computer, you
can start Confirm-IT2 by clicking on Start and then clicking on Programs,
Confirm-IT2 will be shown in the Programs menu. Click on Confirm-IT2 to start
the application.
NOTE: The very first time Confirm-IT2 is started, an installation Wizard
presents a series of setup screens that guide you through the initial configuration.
General information such as passwords and callout appointment reminder
scheduling etc are entered at that time. Any subsequent required changes to the
initial configuration entries may be made by persons who have the administrator
level password.
This User Guide assumes that the Wizard procedure has already been
performed by the user in conjunction with the Confirm-IT2 software
installation personnel. It also assumes that all reminder voice messages have
been recorded and Email/Text message content entered. Some explanation of
these procedures will be included in this manual in case changes are necessary.
The complete Wizard setup and detailed Administration
procedures are covered in the Installation Manual.