Metrohm 815 Robotic USB Sample Processor XL - Manual (Page 12)

1.2 Instrument description ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 ￭￭￭￭￭￭￭￭ 815 Robotic USB Sample Processor XL
2.815.0110
2-Tower version
￭ 2 membrane pumps and 2 valves
￭ 2 connectors for external pumps
￭ 2 stirrer connectors (tower stirrer)
￭ 2 Swing Head connectors
￭ 3 MSB connectors for dosing devices or stir-
rers
￭ 2 USB connectors
￭ 1 controller connection
2.815.0120
2-Tower version
￭ 4 membrane pumps and 4 valves
￭ 2 stirrer connectors (tower stirrer)
￭ 2 Swing Head connectors
￭ 3 MSB connectors for dosing devices or stir-
rers
￭ 2 USB connectors
￭ 1 controller connection
2.815.0130
2-Tower version
￭ 4 connectors for external pumps
￭ 2 stirrer connectors (tower stirrer)
￭ 2 Swing Head connectors
￭ 3 MSB connectors for dosing devices or stir-
rers
￭ 2 USB connectors
￭ 1 controller connection
1.2.2 Instrument components
The 815 Robotic USB Sample Processor XL has the following components:
￭ Turntable
For sample racks with a diameter of up to 48 cm.
￭ One or two towers with lift
With titration head holder. Each lift can subsequently be extended by a
Swing Head and a robotic arm.
￭ One, two or no membrane pump per tower
Instead of an integrated pump, an external pump connector is availa-
ble depending on the model version.