Metrohm 815 Robotic USB Sample Processor XL - Manual (Page 13)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 1 Introduction
815 Robotic USB Sample Processor XL ￭￭￭￭￭￭￭￭ 5
￭ One stirrer connector per tower
For connecting a rod stirrer (802 Stirrer) or a magnetic stirrer (741 Stir-
rer).
￭ Controller connection
For connecting a PC or Touch Control.
￭ Two USB connectors
For connecting a printer, barcode reader or other control devices
(Titrando, Dosing Interface etc.).
￭ Three MSB connectors (Metrohm Serial Bus)
For connecting dosing devices (Dosimat with exchange unit or Dosino
with dosing unit), stirrers or Remote Boxes.
1.2.3 Intended use
The 815 Robotic USB Sample Processor XL is designed for usage as an
automation system in analytical laboratories. It is not suitable for usage in
biochemical, biological or medical environments in its basic equipment
version.
The present instrument is suitable for processing chemicals and flammable
samples. The usage of the 815 Robotic USB Sample Processor XL there-
fore requires that the user has basic knowledge and experience in the
handling of toxic and caustic substances. Knowledge with respect to the
application of the fire prevention measures prescribed for laboratories is
also mandatory.
1.3 About the documentation
Caution
Please read through this documentation carefully before putting the
instrument into operation. The documentation contains information
and warnings which the user must follow in order to ensure safe opera-
tion of the instrument.
1.3.1 Symbols and conventions
The following symbols and styles are used in this documentation:
Cross-reference to figure legend
The first number refers to the figure number, the
second to the instrument part in the figure.
Instruction step
Carry out these steps in the sequence shown.