Metrohm 815 Robotic USB Sample Processor XL - Manual (Page 61)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Appendix
815 Robotic USB Sample Processor XL ￭￭￭￭￭￭￭￭ 53
The arm can be equipped with two microelectrodes, one propeller stirrer
and three spray nozzles. Two buret tips with anti-diffusion valve and one
aspiration tip with connections for M6 tubing are already retracted into
the arm.
Material: PP
6.1462.160 Robotic arm with holder for a titration head and beaker sensor,
left-swinging
The arm can be modified to create the desired titration robotic arm by
means of the installation of a titration head 6.1458.xxx.
Material: PP
6.1462.170 Robotic arm with holder for a titration head and beaker sensor,
right-swinging
The arm can be modified to create the desired titration robotic arm by
means of the installation of a titration head 6.1458.xxx.
Material: PP
6.4.2 Robotic arms for sample preparation
Table 4 Configuration data of the robotic arms for sample preparation
Type 6.1462.030 6.1462.040 6.1462.090 6.1462.240
6.1462.030 6.1462.040 6.1462.090 6.1462.240
Swing direction + – – –
Swing offset 8° 8° 8° –8.6°
Max. swing angle 117° 117° 117° 122°
Swing radius 112 mm 112 mm 112 mm 149.8 mm
6.1462.030 Robotic arm with transfer head, left-swinging
Robotic arm for fully automated pipetting or dilution of liquid samples
with Sample Processor Systems.
Material: PP
6.1462.040 Robotic arm with transfer head, right-swinging