Metrohm 815 Robotic USB Sample Processor XL - Manual (Page 53)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Handling and maintenance
815 Robotic USB Sample Processor XL ￭￭￭￭￭￭￭￭ 45
4 Handling and maintenance
4.1 General
The 815 Robotic USB Sample Processor XL requires appropriate care.
Excess contamination of the instrument may result in functional disrup-
tions and a reduction in the service life of the sturdy mechanics and elec-
tronics of the instrument.
Severe contamination can also have an influence on the measured results.
Regular cleaning of exposed parts can prevent this to a large extent.
Spilled chemicals and solvents must be removed immediately. In particular,
the mains plug should be protected from contamination.
4.2 Care
￭ Check all tubing connections regularly for leaks.
￭ Flush out the tubing connections from time to time. The tubing must
be replaced after prolonged usage.
4.3 Quality Management and validation with Metrohm
Quality Management
Metrohm offers you comprehensive support in implementing quality man-
agement measures for instruments and software. Further information on
this can be found in the brochure «Quality Management with
Metrohm» available from your local Metrohm agent.
Maintenance
Electronic and mechanical functional groups in Metrohm instruments can
and should be checked as part of regular maintenance by specialist per-
sonnel from Metrohm. Please ask your local Metrohm agent regarding the
precise terms and conditions involved in concluding a corresponding
maintenance agreement.
Note
You can find information on the subjects of quality management, vali-
dation and maintenance as well as an overview of the documents cur-
rently available at
www.metrohm.com/com/ under Support.