Metrohm 815 Robotic USB Sample Processor XL - Manual (Page 60)

6.4 Robotic arms ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
52 ￭￭￭￭￭￭￭￭ 815 Robotic USB Sample Processor XL
6.1462.060 Robotic arm with holder for a titration head, left-swinging
The arm can be modified to create the desired titration robotic arm by
means of the installation of a titration head 6.1458.xxx.
Material: PP
6.1462.070 Robotic arm with holder for a titration head, right-swinging
The arm can be modified to create the desired titration robotic arm by
means of the installation of a titration head 6.1458.xxx.
Material: PP
6.1462.260 Robotic arm with holder for a titration head, left-swinging,
external
The arm can be modified to create the desired titration robotic arm by
means of the installation of a titration head 6.1458.xxx. The cutout per-
mits movement to external positions near the rack, e.g. an external rinsing
station.
Material: PVC
Table 3 Configuration data of the robotic arms with beaker sensor
Type 6.1462.150 6.1462.160 6.1462.170
6.1462.150
6.1462.160 6.1462.170
Swing direction +/– + –
Swing offset 0° –8° –8°
Max. swing angle 84° 73° 73°
Swing radius 110 mm 127 mm 127 mm
6.1462.150 Robotic arm with titration head and beaker sensor, left or right-
swinging
For titration in 75 mL sample vessels and larger.