Metrohm 818 IC Pump - Manual (Page 20)

2 Installation
818 IC Pump / 8.818.1023 Instructions for Use
14
2.5.2 Connection to PC
The 818 IC Pump can also be connected directly to a PC. Connect the
RS 232 interface 17 of the 818 IC Pump with a free COM port at the PC
using the 6.2125.110 (for 9 pin COM port connector) or 6.2125.060
cable (for 25 pin COM port connector) according to the figure below. To
ensure proper functioning of the communication between the PC and
818 IC Pump, the sliding switch 16 on the IC pump must be set to "RS
232".
Fig. 7: Connection of 818 IC Pump to PC
818
CURRENT
LOOP
RS 232
6.2125.110/6.2125.060