Metrohm 865 Dosimat plus - Manual (Page 26)

4.1 Switching the instrument on and off ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
16 ￭￭￭￭￭￭￭￭ 865 Dosimat plus
4 Operation
4.1 Switching the instrument on and off
Switching on the instrument
Proceed as follows:
1 ￭ Press the red [FILL] key.
The instrument is initialized and a system test performed. This
process takes some time.
￭ If a buret unit has been attached, then a request appears to carry
out the PREP function:
All tubings and the cylinder are rinsed with the PREP (Preparing)
function. The preparing of the buret unit is described in chapter
"Preparing the buret unit (PREP)", page 25.
￭ Confirm the message with [OK].
The display of this message can be deactivated in the system set-
tings (see "PREP warning", page 30).
The main dialog is displayed: