Metrohm 865 Dosimat plus - Manual (Page 39)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 System settings
865 Dosimat plus ￭￭￭￭￭￭￭￭ 29
Note
A second language must be installed in advance in order to be able to
select it here. The installation may only be carried out by competent
personnel.
Dialog type
The user dialog can be limited for routine operations. One can operate
normally with methods in the limited dialog. However, no settings can be
made or methods deleted.
The resetting of the dialog does not take effect until the main menu is exi-
ted.
The limitation of the dialog has the following effects:
￭ The menu items System and Parameters are not shown in the main
menu.
￭ Methods can only be loaded, but not deleted, exported or created.
Note
If the limited dialog is activated for routine operations, then the expert
dialog cannot be switched on during running operations. To change
the dialog type, the 865 Dosimat plus must be switched off and then
back on again. The expert dialog can be forced at the time the instru-
ment is started. Then it is possible to enter whatever settings one
wishes, e.g. the changing of the dialog type. If the instrument is
switched off again without changing the dialog type, then the routine
dialog will remain activated.
Forcing the expert dialog:
￭ Switch on the instrument.
￭ Wait for the display of the instrument logo with the lettering easy,
safe, precise.
￭ Press the [STOP] key once again and hold it down while also briefly
pressing the [BACK] key.
￭ Release both keys once again.
Selection Expert | Routine
Default value Expert
Expert
Complete dialog.
Routine
Limited dialog for routine operations.