Metrohm 865 Dosimat plus - Manual (Page 76)

8.6 Remote interface ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
66 ￭￭￭￭￭￭￭￭ 865 Dosimat plus
3 Confirm the initialization
Note
If the query is not confirmed within 8 s, then the procedure will be
interrupted.
￭ Press [BACK] twice.
Initialization is started. The process takes approximately 80 s. The
instrument will be automatically restarted after successful initializa-
tion.
8.6 Remote interface
8.6.1 Pin assignment of the remote interface
1
5
6
9
5
1
9
6
Figure 20 Pin assignment of remote socket and plug
The above figure of the pin assignment applies for all Metrohm instru-
ments with 9-pin D-Sub remote connectors.
Table 4 Inputs and outputs of the remote interface
Pin No. Assignment Function
1 Output 0 Ready/EOD
2 Output 1 -
3 Output 2 -
4 Output 3 Pulse
5 Output 4 Error