Metrohm 827 pH lab User Manual
Page 26
4.2 pH calibration
18
826/827 pH meter, Instructions for Use
3 Result
•
Wait for potential measurement, the result will be displayed:
•
After 30 s the pH meter will switch back automatically to the
measurement display. This can also be done immediately with
<OK> or <QUIT>.
3 Poor calibration data
•
If the calibration data are outside the calibration parameters
defined as the limits (see Section 6.1.3) then a corresponding
message will be shown:
•
You can still accept the calibration data with <OK>, or reject
it with <QUIT>.
4 Show calibration data
You can now display the calibration data under param/
cal.data.
5 Print calibration report
•
Change to the menu << report >> with the arrow keys <>
or <>.
•
Press <OK>.
•
Select the report cal with the arrow keys <> or <> and
start the printing with <OK>.