Cisco 7912G - Manual (Page 12)

Preface
Objectives
xii
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
Objectives
This guide provides the required steps to get the Cisco Unified IP Phone up and
running on a Voice-over-IP (VoIP) network. Because of the complexity of an IP
telephony network, this guide does not provide complete and detailed information
for procedures that you need to perform on the Cisco Unified CallManager
application or other network devices.
Organization
This guide is organized as follows:
Chapter Description
Chapter 1, “An Overview of the Cisco Unified IP
Phone” Provides a conceptual overview and description of
the Cisco Unified IP Phone
Chapter 2, “Preparing to Install the
Cisco Unified IP Phone on Your Network” Describes how the IP Phone interacts with other
key IP telephony components, and provides an
overview of the tasks required prior to installation
Chapter 3, “Setting Up the
Cisco Unified IP Phone” Describes how to properly and safely install and
configure the Cisco Unified IP Phone on your
network
Chapter 4, “Configuring Settings on the Cisco
Unified IP Phone” Describes how to configure network settings,
verify status, and make global changes to the
Cisco Unified IP Phone
Chapter 5, “Configuring Telephony Features” Provides an overview of procedures for
configuring telephony features, setting up phone
services, and adding users to
Cisco Unified CallManager
Chapter 6, “Viewing Model and Status
Information on the Cisco Unified IP Phone” Explains how to view model information, status
messages, network statistics, and firmware
information from the Cisco Unified IP Phone
Chapter 7, “Troubleshooting the Cisco Unified IP
Phone” Provides tips for troubleshooting the
Cisco Unified IP Phone