Editing settings in the network configuration menu, Editing settings in the – Cisco 7912G User Manual
Page 79
4-5
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Accessing Network Configuration Settings through the Network Configuration Menu on the Phone
Editing Settings in the Network Configuration Menu
When you edit the value of an parameter on the Network Configuration menu,
follow these guidelines:
•
Use the keys on the telephone keypad to enter numbers and letters.
•
To enter letters using the keypad, use a corresponding number key. Press the
key one or more times to display a particular letter. For example, press the 2
key once for “a,” twice quickly for “b,” and three times quickly for “c.” After
you pause, the cursor automatically advances to allow you to enter the next
letter.
•
If an parameter can accept either numbers or letters, the Number or Alpha
softkey will appear. Press the Number softkey to enter numbers. Press the
Alpha softkey to enter letters.
•
To enter a period (for example, in an IP address), press the * (asterisk) key.
•
To correct a mistake, press the << softkey to delete the character to the left of
the cursor.
•
Press the Cancel softkey before pressing the Validate softkey or the Save
softkey to discard any changes you have made.
Related Topics
•
Displaying the Network Configuration Menu, page 4-3
•
Unlocking and Locking Options on the Network Configuration Menu,
page 4-3