Cisco 7912G User Manual
Page 37
1-9
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
Chapter 1 An Overview of the Cisco Unified IP Phone
What Features are Supported on the Cisco Unified IP Phone 7905G and 7912G?
In some places, this manual provides partial instructions for procedures that
involve Cisco Unified CallManager Administration. These instructions are
intended to point you to the appropriate page in the Cisco Unified CallManager
application and to provide some initial guidance.
For more information about the Cisco Unified CallManager Administration
application, refer to Cisco Unified CallManager documentation, including
Cisco Unified CallManager Administration Guide. You can also use the
context-sensitive help that is available within the application. Access
context-sensitive help by choosing Help > For this screen from the main menu
bar.
You can access the complete Cisco Unified CallManager documentation suite at
this location:
Related Topic
•
Chapter 5, “Configuring Telephony Features”
Configuring Network Features Using the Cisco Unified IP Phone
You can locally configure features such as DHCP, TFTP, and IP settings on the
phone itself. You can also obtain statistics about a current call or firmware
versions on the phone.
For more information about configuring features and viewing statistics from the
phone, see
Chapter 4, “Configuring Settings on the Cisco Unified IP Phone”
and
see
Chapter 6, “Viewing Model and Status Information on the Cisco
Related Topics
•
Configuring Settings on the Cisco Unified IP Phone, page 4-1
•