Cisco 7912G - Manual (Page 94)

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
SIP Configuration Menu Parameter Descriptions
4-20
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
Use Login ID Indicates whether to use the value
specified with the Login ID
parameter instead of the value
specified with the User ID
parameter for authentication of the
phone. 1. Unlock configuration parameters.
2. Scroll to the Use Login ID parameter, and
then press the Yes softkey to use the value
specified with the Login ID parameter for
authentication.
3. Press the Save softkey.
Login ID Alternate ID used for
authentication of the phone. 1. Unlock configuration parameters.
2. Set the Use Login ID parameter to Yes.
3. Scroll to the Login ID parameter, press
the Edit softkey, and then enter a login
ID.
4. Press the Accept softkey, and then press
the Save softkey.
Local SIP Port Port where the phone listens for
incoming requests and sends
outgoing requests. 1. Unlock configuration parameters.
2. Scroll to the Local SIP Port parameter,
press the Edit softkey, and then enter a
SIP port from 5060 to 65535.
3. Press the Accept softkey, and then press
the Save softkey.
Local RTP Port Port from which the phone
transmits and receives media
streams. 1. Unlock configuration parameters.
2. Scroll to the Local RTP Port parameter,
press the Edit softkey, and then enter a
SIP port, which must be an even number
from 0 to 65535.
3. Press the Accept softkey, and then press
the Save softkey.
Table 4-2 SIP Configuration Menu Parameters (continued)
Parameter Description To Change