Cisco 7912G - Manual (Page 84)

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu Parameter Descriptions
4-10
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
e. Click the Find button to display a list of devices.
f. Click on the device name corresponding to your Cisco Unified IP phone.
Cisco Unified Call Manager displays the Phone Configuration
Administration page.
g. Scroll down to the Symmetric Key Information box for the phone.
Step 6 Copy the Symmetric Key value (if this value is not already present, click the
Generate String button) from the Cisco Unified CallManager Phone
Configuration Administration page and paste it into the EncryptKeyEx field on
the Cisco Unified IP Phone Network Parameters page.
Step 7 Click Apply on the Phone Configuration Web Page to save the values.
The phone will automatically reboot and request its encrypted configuration file
from the TFTP server. When the idle screen is displayed along with a telephone
number, the phone is ready for use.
Network Configuration Menu Parameter
Descriptions
Table 4-1 describes all network configuration parameters that exist in the Network
Configuration menu of the Cisco Unified IP Phone 7905G/7912G.
Table 4-1 Network Configuration Menu Parameters
Parameter Description To Change
DHCP Server IP address of the Dynamic Host
Configuration Protocol (DHCP)
server from which the phone
obtains information such as its IP
address, its subnet mask, and the IP
addresses of the network gateway
and the DNS, NTP, and TFTP
servers. Display only—cannot configure.
MAC Address Unique Media Access Control
(MAC) address of the phone. Display only—cannot configure.