Cisco 7912G - Manual (Page 150)

Appendix A Reference List of Parameters
Configuration Parameters
A-28
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
Tone Parameters
Table A-8 describes the tone parameters that you can configure through a phone’s
profile file or through its Tone Parameters web page.
GUI Set Mask
(on web page)
CallPrefGuiSet
(in profile)
Specifies which parameters on the Call Preferences menu on the phone can be
changed by an end user.
Set a bit to 0 if an end user should not be able to change the corresponding
parameter. Set the bit to 1 if an end user should be able to change the parameter.
• Bit 0: Do Not Disturb.
• Bit 1: Allow Call Waiting.
• Bit 2: Block Caller ID.
• Bit 3: Call Forward Number.
• Bits 4–5: Reserved.
• Bit 6: Display Name.
• Bit 7: Time Format.
• Bit 8: Date Format.
• Bit 9: Voice Mail Number.
• Bit 10: Allow Call Transfer.
• Bit 11: Allow Blind Transfer.
• Bit 12: Allow Conference.
• Bit 13: Short Name.
• Bit 24: Block Anonymous Call.
• Bit 25: Reserved.
• Bit 26: Forward to Voice Mail Delay.
Value type: Bitmap.
Default value: 0xFFFFFFFFparameters:network<$startrange>
Table A-7 Call Preference Parameters (continued)
Parameter Description