Cisco 7912G - Manual (Page 87)

4-13
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu Parameter Descriptions
DNS Server 1,
DNS Server 2 IP addresses of the Primary
Domain Name System (DNS)
server (DNS Server 1) and
secondary DNS server (DNS
Server 2) used by the phone. 1. Unlock configuration parameters.
2. Set the Alternate DNS parameter to
Yes.
3. Scroll to the DNS Server 1 parameter
or the DNS Server 2 parameter, press
the Edit softkey, and then enter a new
DNS server IP address.
4. Press the Validate softkey, and then
press the Save softkey.
NTP Server 1,
NTP Server 2 (not
applicable when used
with
Cisco Unified CallM
anager) IP addresses of the Primary
Network Time Protocol (NTP)
server (NTP Server 1) and
secondary NTP server (NTP Server
2) used by the phone. 1. Unlock configuration parameters.
2. Set the Alternate NTP parameter to
Yes.
3. Scroll to the NTP Server 1 parameter
or the NTP Server 2 parameter, press
the Edit softkey, and then enter a new
NTP server IP address.
4. Press the Validate softkey, and then
press the Save softkey.
Table 4-1 Network Configuration Menu Parameters (continued)
Parameter Description To Change