Cisco 7912G - Manual (Page 145)

A-23
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
Appendix A Reference List of Parameters
Configuration Parameters
Allow Conference
(on web page)
Conference
(in profile)
Whether the conference feature is enabled on a phone. If this feature is
enabled, the Confrn softkey will appear when appropriate, allowing a
three-way conference to be established. If this feature is disabled, this softkey
will never be available.
• 0=Disable the conference feature.
• 1=Enable the conference feature.
Value type: Boolean.
Default value: 1
Block Caller ID
(on web page)
BlockCallerId
(in profile)
Whether a phone’s caller ID information, which includes the value specified
by the Display Name parameter and the phone number, is sent with an outgoing
call. If this parameter is enabled, outgoing calls will use “Anonymous” as the
phone’s caller ID.
• 0=Do not block outgoing caller ID information.
• 1=Block outgoing caller ID information.
Value type: Boolean.
Default value: 0
Block Anonymous
Calls
(on web page)
BlockAnonymous
(in profile)
Whether a phone rejects (blocks) an incoming call with “Anonymous” caller
ID will be rejected.
• 0=Do not block anonymous incoming calls.
• 1=Block anonymous incoming calls.
Value type: Boolean.
Default value: 0
Do Not Disturb
(on web page)
DoNotDisturb
(in profile)
Whether the Do Not Disturb feature is enabled on a phone. If this feature is
enabled, calls to the phone will receive a busy signal.
• 0=Disable the do not disturb feature.
• 1=Enable the do not disturb feature.
Value type: Boolean.
Default value: 0
Table A-7 Call Preference Parameters (continued)
Parameter Description