Cisco 7912G - Manual (Page 78)

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Accessing Network Configuration Settings through the Network Configuration Menu on the Phone
4-4
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
If a password has been specified for the phone, you must enter the password when
unlocking network configuration options.
To unlock network settings on the Cisco Unified IP Phone 7905G and 7912G,
perform the following steps. Network settings are locked again automatically
when you return to the main screen.
Procedure
Step 1 Press the Menu button.
Step 2 Choose Settings > Network Configuration.
Step 3 From the Network Configuration menu, press **#.
Step 4 If the phone displays “Enter Admin Password,” enter your password and then
press the Accept softkey.
For information about entering a password, see the “Editing Settings in the
Network Configuration Menu” section on page 4-5 .
Step 5 Look at the icon in the upper-right portion of the LCD.
When options are locked, the icon appears as a locked padlock.
When options are unlocked, the icon appears as an unlocked padlock.
Related Topics
• Displaying the Network Configuration Menu, page 4-3
• Editing Settings in the Network Configuration Menu, page 4-5