Cisco 7912G - Manual (Page 40)

Chapter 1 An Overview of the Cisco Unified IP Phone
Understanding the Requirements for Installing and Configuring the Cisco Unified IP Phone 7905G and 7912G
1-12
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
Table 1-2 Overview of Configuration Procedures for the Cisco Unified IP Phone
Required Task Purpose For More Information
1. Gather the following
information about the phone for
use in Cisco Unified CallManager
Administration:
– Information requested in
the Device Information
fields, if applicable, such
as the device pool and
calling search space.
– The
Cisco Unified CallManag
er user to associate with
the phone.
– The number of lines and
associated directory
numbers to assign to the
phone.
– Features to be added and
configured for the phone.
You will refer to this information
when using the
Cisco Unified CallManager
Administration Phone
Configuration web page to
configure a phone.
The Device Information fields on
this page will auto-populate if
information is relevant and
available. Edit fields if you want to
override system settings on a
per-device basis.
See the “Adding Phones to
the Cisco Unified
CallManager Database”
section on page 2-12
.
See the Chapter 5,
“Configuring Telephony
Features”
.
Refer to
Cisco Unified CallManager
System Guide.
Refer to
Cisco Unified CallManager
Administration Guide.
2. Configure routers, gateways,
and switches to handle voice
communication. Establishes the infrastructure for
the IP telephony network. See the “Understanding
How the Cisco Unified IP
Phone Interacts with the
Cisco Catalyst Family of
Switches” section on
page 2-3
and the
documentation included
with these devices.