Cisco 7912G - Manual (Page 83)

4-9
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Configuring the Encryption Key
Configuring Encryption Key Using Phone Configuration Web
Page
Procedure
Step 1 Connect your Cisco Unified IP Phone to the network.
Your Cisco Unified IP phone should upgrade automatically to a SIP image.
Step 2 Determine the IP address of the phone:
a. Press the MENU key
b. Go to Settings > Network Configuration > IP Address, and make a note of
the IP address because you will need to enter this address later.
Step 3 Start two instances of a web browser.
You will use one browser to access the Phone Configuration Web Page and the
other browser to access the Cisco Unified CallManager Administration pages.
Step 4 Do the following to access the Phone Configuration Web Page:
a. Enter the URL:
http://PHONE_IP_ADDRESS/dev
b. Enter cisco in the UIPassword field if prompted.
c. Click Apply.
The Network Parameters page (which is one of the Phone Configuration Web
pages) displays.
Step 5 Do the following to access the Cisco Unified CallManager Administration pages.
a. Enter the following URL:
http://<CALL_MANAGER_IP_ADDRESS>
b. Click on Cisco Unified CallManager Administration link.
If you are prompted to accept or cancel a security certificate, you must accept
the certificate to continue.
c. Enter the User Name and Password to access Cisco Unified CallManager.
The Cisco Unified CallManager Administration main page displays.
d. Click on Device > Phone.