Component video, Component video -2 – ClearOne PAN6400 User Manual
Page 20
NetStreams Panorama System Installation Guide
3-2
All specifications subject to change without notification. All rights reserved. Copyright © 2006 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
source inputs 2-4. (Do not put any video cable in the red port, or anything but a
composite cable in the green port.)
Because S-Video and composite video signals do not use all input ports, you can mix
them between sources. The S-Video adapter (provided) uses the blue (Pb) and red (Pr)
ports leaving the green (Y) port available for composite video distribution for a
different source.
However, you cannot connect digital audio through the PAN6400 VDC in this
configuration. In addition, the display would need to have available ports for
simultaneous S-Video and composite connections to accommodate the sources with
differing video connections. You can use the remote control for the display to toggle
between the two sources by selecting the source input.
Figure 3-1 shows an example of how you might connect a video switch in a standalone
configuration.
Figure 3-1
Video switch in a standalone environment
Component Video
The following procedures show how to connect a component video source to a
PAN6400 VDC. This is easily accomplished using one PAN6400 VDC. This
configuration is useful in environments that do not need audio, such as restaurants or
bars.
PANVP700
PAN6400
VIDEO SOURCES
Display 1
Display 2
Display 3
Display 4
Display 5
Display 6
IR Receiver
IR Emitter