ClearOne PAN6400 - Manual (Page 34)

NetStreams Panorama System Installation Guide
4-6
All specifications subject to change without notification. All rights reserved. Copyright © 2006 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
Adding Additional Displays (Cascade Mode)
One Musica and one NetStreams Panorama system together provide for the
distribution of four audio and video sources to as many as six zones. For the
distribution of four sources to as many as 18 zones, integrate up to three Panorama
PAN6400 VDC and Musica MU5066ADC pairs.
Connect each additional PAN6400 VDC and Musica MU5066ADC with null modem
RS-232 cables from the IO2 to IO1 ports as discussed above.
A null modem RS-232 cable connects two PAN6400 VDCs to provide a total of 12
displays (zones) (NS-MUXK-12) and the null modem RS-232 cable included in the
Musica 18-Zone Expansion Kit (NS-MUXK-18) connects three PAN6400 VDCs to
provide 18 displays. The RS-232 cable connects into the PAN6400 VDC I01 port on
all VDCs.
The analog audio expansion cables (also provided in the Musica expansion kit)
connect to all Musica MU5066ADCs. Figure 4-3 focuses on integrating Panorama and
Musica, including IR connections. The figure does not show the analog digital cables
connecting the Musica MU5066ADC. See Application Note 030017 on the
NetStreams website for a figure that includes those cables as well as complete
information on expanding Musica to 18 displays and keypads.
Figure 4-3 shows how to integrate two additional PAN6400 VDCs with a Musica
system in cascade mode.
Figure 4-3 Integrating PAN6400 VDC with Musica MU5066ADC in cascade mode
Legend
IR Emitter and
null modem
CAT5 from VP
CAT5 from
keypad
Component
Component
Zones 1-6 Zones 7-12 Zones 12-18
Display
Musica
keypad
PANVP500
IR Emitter
PAN6400 VDCs Musica MU5066ADCs Null modem
cable MUXK-18 null
modem cable
IR Emitters