Learning ir, Learning ir -5 – ClearOne PAN6400 User Manual
Page 51
Using IR
6-5
All specifications subject to change without notification. All rights reserved. Copyright © 2006 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
The front of the VDC has 11 LEDs in three groups: Power (1 LED), Displays (6
LEDs), and Sources (4 LEDs) (see
).
During normal operations, these LEDs indicate power status, selected display, and
selected source, as the labels on the PAN6400 VDC indicate. During IR learning
mode, these LEDs change their functions to assist in learning and the labels on the
PAN6400 VDC do not reflect LED meaning during learning mode.
In IR learning mode, the POWER LED becomes a status indicator for what is being
learned. The LED is green when displays are being learned and red when sources are
being learned. The POWER LED flashes when IR learning is complete.
The six LEDs in the DISPLAY group represent which specific source or display is
currently being learned. For example, if the Power LED is red and the second Display
LED is lit, then the PAN6400 VDC is set to learn IR codes for Source 2.
The four LEDs in the SOURCE group represent which step the PAN6400 VDC is on
during learning mode. As PAN6400 VDC and source or display remote button presses
successfully register with the PAN6400 VDC during learning mode, SOURCE LEDs
come on and stay on until all steps in the learning process are completed.
Figure 6-3 shows a PAN6400 VDC storing IR codes for Display 5, after a user has
pressed the source or display remote button.
Figure 6-3
LEDs during IR learning mode.
Learning IR
The PAN6400 VDC can store 10 IR codes each per source and display.
Table 6-1
LED definitions during IR learning mode
LED
Definition
POWER
Green= Learn Displays
Red= Learn Sources
DISPLAY
Indicates the specific source or display being learned
SOURCE
Indicates step in IR learning