Gh j k l – ClearOne PAN6400 User Manual
Page 41
Integrating Panorama with DigiLinX
5-5
All specifications subject to change without notification. All rights reserved. Copyright © 2006 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
RS-232 commands to the PAN6400 VDC it is connected to and the additional
PAN6400 VDCs mirror the actions of the first PAN6400 VDC.
Although you can mirror the PAN6400 VDC with any supported video signal, most
installations use mirroring to distribute component video with coaxial digital audio
(S/PDIF) while the DigiLinX system distributes analog audio. Although the DigiLinX
system can read digital audio, it only outputs analog audio. When the PAN6400 VDC
distributes digital audio, the system can support a digital surround sound home theater.
Figure 5-3 and the associated steps show how to wire a DigiLinX system and two
PAN6400 VDCs. Use a VP700 to connect the display and provide IR capability and a
VP500 to connect the digital audio. For more detail on the ports on the rear panel of the
Panorama, see
Figure 5-3
Integrating PAN6400 VDC with DigiLinX in mirrored mode
Legend
IR Emitter and
null modem
CAT5
Component
Coaxial audio
Speaker and
analog audio
Power and
speaker
Display
VP700
Back
Back
Front
Front
VP500
IR Receiver
PAN6400 (1)
PAN6400 (2)
IR Emitter
Source
5.1 or 7.1 channel
speaker outputs
w
e
r
t
y
u
i
o
a
s
d
f
Speakers
TouchLinX
SpeakerLinX
MediaLinX
SwitchLinX
ControLinX
IR Emitter
g
h
j
k
l