Safety instructions, Safety instructions -4 – ClearOne PAN6400 User Manual
Page 8
NetStreams Panorama System Installation Guide
1-4
All specifications subject to change without notification. All rights reserved. Copyright © 2006 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
WARNING
NOTE
Safety Instructions
CAUTION!
To reduce the risk of possible fire or electrical shock, make all connections and finish all terminations
before turning on power to the unit.
Do not block any ventilation openings. For example; do not place on a rug, bed,
sofa, or similar surface which impedes airflow across the chassis. Airflow through
the ventilation openings should be unobstructed. Provide ventilation on all sides of
the appliance, especially if placed in a rack. If ventilation is blocked, the appliance
may overheat and malfunction.
Do not install near heat sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat. Do not expose the appliance to
direct sun light as the appliance’s internal components temperature may rise and
shorten the life of the components. Avoid damp and dusty places.
Before turning the
power on for the first
time, read this section
carefully. All models are
designed for use only
with the power supply
voltage of the region
where they are sold.
Unplug this apparatus during lightning storms or when unused for long periods of
time.
Only connect the appliance to a power supply described in the operating
instructions or as marked on the appliance.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong is
provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
NetStreams provides a
VSPW 12v DC power
supply. Review whether
this is the appropriate
voltage and power
supply for your country
and call NetStreams
Technical Services at
(866) 353-3496 if you
have any questions.
A label located at the rear panel power connection indicates the DC power input for
the unit. The label will read 100-240V DC 12V/1.5A Adapter.
Route power cord and other cables so that they are not likely to be walked on,
tripped over, pinched, or stressed. Pay particular attention to condition of cords and
cables at plugs, and the point where they exit from the apparatus. To prevent risk of
fire or injury, damaged cords and cables should be replaced immediately.
Only use attachments/accessories specified by the manufacturer.
The apparatus should be serviced by qualified service personnel when:
the power supply cord or the plug has been damaged
objects have fallen or liquid has spilled into the unit
the apparatus has been exposed to rain or other moisture
the apparatus does not appear to operate normally
the apparatus has been dropped, or the enclosure damaged.
Do not attempt to service the appliance beyond that described in the operating
instructions. All other servicing should be referred to qualified service personnel.
Clean only with a dry cloth. Do not use rough material, thinners, alcohol or other
chemical solvents or cloths since this may damage the finish or remove the panel
lettering. Never pour any liquid on or in the device.