Integrating the musica mur2em network interface, Integrating the musica – ClearOne PAN6400 User Manual
Page 35
Integrating with NetStreams Musica 5000 Series
4-7
All specifications subject to change without notification. All rights reserved. Copyright © 2006 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Integrating the Musica MUR2EM Network Interface
When integrating the Panorama with the NetStreams Musica 5000 Series Multi-Room
Audio & Control system, you can use the Musica MUR2EM Network Interface to
provide web browser-based control of your system (see Figure 4-4).
Figure 4-4
PAN6400 VDC and Musica MUR2EM
To connect the MUR2EM for IP configuration, complete the following steps:
1.
Ensure power is off to all devices.
2.
Connect the MUR2EM to the IO2 port of the PAN6400 VDC using the null modem
cable provided.
3.
Connect the Musica MU5066ADC to the IO1 port of the PAN6400 VDC using a
null modem cable.
4.
Connect the Ethernet port of the MUR2EM to the home network switch with CAT5
cable.
5.
Connect the Ethernet port of the computer to the home network switch with CAT5
cable.
6.
Ensure all power cables are plugged in.
7.
Start the computer.
For further information on the MUR2EM (such as configuring the IP address), see the
Musica MUR2EM Installation Guide.
Legend
Null modem
CAT5
Musica MU5066ADC
PAN6400 VDC
Computer System
MUR2EM
Power
w
e
Home Network Switch
r
t