Cardinal Industries 225 WEIGHT INDICATOR - Manual (Page 102)

CONTINUOUS OUTPUT FORMATS, CONT.
Weight on Demand Format
If continuous output has not been selected for PRINTER or COM Ports ( CONT=NO), the 225
indicator will respond to a weight request (ENQ) as follows.
The host device (computer) sends:
The 22
<s><xxxxxx><d><uu><m><cc><cr>
Where:
s = Sign "-" = negative, " " (blank) = positive
Weight Six digits
Decimal point Added to string if enabled in setup
u tn, lb, oz, t, kg, g
m = Mode G = Gross, N = Net
Weight Status OC = over capacity
CZ = center of zero
layed
c urn (hex 0D)
ENQ - (hex 05)
5 will respond:
xxxxxx.xxx =
d =
u = Units
cc =
MO = motion
ee = weight not currently being disp
r = Carriage Ret
8200-M538-O1
y 225 Installation
Page 98