Cardinal Industries 225 WEIGHT INDICATOR - Manual (Page 93)

ID STORAGE OPERATION, CONT.
PERMANENT ID - Two Pass Transaction (Two-Step Operation), Cont.
then
pt 2 name entered in ID Storage Setup).
PRINT key to
ow Print Pass 1.
RINT key to
.
t. Proceed to
icator in normal operations mode, place the loaded container on the scale
eric ID string and press the ENTER key.
et.
ay will show Print Pass 1
to
ed with the ID) then
e
1= (the Prompt 1 name entered
3. Enter up to a 12 digit alpha-numeric ID string and press the ENTER key.
4. The indicator will print a ticket, display Print Pass 2, and then display
Accumulating before returning to the Gross weight display.
5. The Net weight will be added to the accumulator of the entered ID string and the ticket
printed will show the TIME, DATE, ID, TIME/DATE of Stored Tare weight, the Gross,
Tare, and Net weights.
Step 1 - Empty or Loaded Container With Two ID Prompts
1. With the indicator in normal operations mode, place the loaded container on the scale
2. Press the ID key. The display will change to show ID1= (the Prompt 1 name entered
in ID Storage Setup).
3. Enter up to a 12 digit alpha-numeric ID string and press the ENTER key.
4. The display will momentarily show REF= (and the name associated with the ID)
change to ID2= (the Prom
y If only one ID prompt is needed AND a ticket is desired, press the
store the weight and print the ticket. The display will sh
Proceed to Step 6.
5. If two ID prompts are required, enter up to a 12 digit alphanumeric string for the second
ID prompt.
y If only two ID prompts are needed AND a ticket is desired, press the P
store the weight and print the ticket. The display will show Print Pass 1
Proceed to Step 6.
y If a ticket is NOT desired, press the ENTER key to store the weigh
Step 6.
6. The indicator will return to the Gross weight display.
Step 1 - Empty or Loaded Container With One ID Prompt
1. With the ind
2. Press the ID key. The display will change to show ID1= (the Prompt 1 name entered
in ID Storage Setup).
3. Enter up to a 12 digit alpha-num
y If a ticket is desired, press the PRINT key to store the weight and print the tick
The displ . Proceed to Step 4.
y If a ticket is NOT desired, press the ENTER key to store the weight. Proceed
Step 4.
4. The display will momentarily show REF= (and the name associat
return to the Gross weight display.
Step 2 - Empty or Loaded Container with One, Two or Three ID Prompts
1. With the indicator in normal operations mode, place the loaded container on the scal
2. Press the ID key. The display will change to show ID
in ID Storage Setup).
8200-M538-O1
y 225 Installation
Page 89