Cardinal Industries 225 WEIGHT INDICATOR - Manual (Page 95)

PRESET WEIGHT COMPARATORS OPERATION
17. SET TRIM (SET TRIM WEIGHT)
1. With the display showing the values of the 16 presets, press the 1 and 7 keys and then
the ENTER key.
1. T=
2. T=
0 7. T= 0 13. T= 0
0 8. T= 0 14. T= 0
0
4. T= 0 10. T= 0 16. T= 0
3. T= 0 9. T= 0 15. T=
5. T= 0 11. T= 0 17. SET WGT
6. T= 0 12. T= 0
ENTER to EXIT, or PWC# TO CHANGE: 0
PRESET
2. The di
3. If the v ess the ENTER key
to exit and return to normal operation or press the 1 and 7 keys and then the ENTER
key to return to the dis
4. , us
ENTER key. The display will change to show the current trim weight value of
o save the new setting.
ht is to compensate for material in transit and
splay will change to show the values of the 16 preset trim weights.
alues displayed for each preset trim weight are acceptable, pr
play showing the preset weight values.
e the numeric key to select the PWC# trim weight to change and then Otherwise
press the
the preset selected.
5. Using the numeric keys, enter the new value for the preset trim weight and then press
the ENTER key t
6. Continue with this procedure until a value for each preset trim weight to be used has
been entered.
7. After the last preset value has been entered, press the ENTER key to exit and return to
normal operation.
Remember that the trim weig
causes the preset to turn on when the displayed weight equals or exceeds the
Preset weight value LESS its associated Trim weight value. Also remember
that the preset is based on the displayed weight, which can be either gross or
net weight.
n r Preset Values Completed
fte entry of the presets and trim weight is complete, operation may begin. Press the ENTER
key
always active unless a zero preset value was entered for the preset.
IMPORTANT! Remember that the preset weight comparators function
operates on the absolute value of the weight ignoring the polarity.
E
A
te
r
to exit and return to normal operation. Note that the Preset Weight Comparators are
8200-M538-O1
y 225 Installation
Page 91