Ascii commands – Cardinal Industries 225 WEIGHT INDICATOR User Manual
Page 104
ASCII COMMANDS
The Model 225 indicator will respond to ASCII coded serial data, in the format below, when
llowed by a carriage return <cr>
and can be upper or lower case, or any combination.
parameter item designator (e.g. “PWC (1) <cr>” requests
the value of PWC number 1 preset to be transmitted from the indicator).
y
lowed by the equal sign “=” is a set command and must be followed by
the data desired to be stored for that parameter.
ithout an equal sign requests data to be transmitted from the indicator
(a query command).
y
etween the values.
the indicator, send the command to request
ame data to be transmitted from the indicator.
Commands
U
Command
input to the RXD serial input or the IR port.
y The commands are ASCII strings, without spaces, fo
y Data inside parenthesis is the
A command fol
y Any command w
Commands that set more than one value use commas b
y To verify data has been stored correctly in
the s
U
U
Response
U
Description
U
U
Gross<cr>
1000lb G
Transmit Gross Weight
Tare<cr>
00lb T
Transmit Current Tare
1
Tare=123<cr>
OK
Set Tare To Value
Net
00lb N
<cr>
9
Transmit Net Weight
PWC (1)<cr>
0lb PWC1
ransmit PWC Value
10
T
PWC (1)=123<cr>
K
ue
O
Set PWC To Val
Fas
100lb F
it 2 Speed DFC Fast Value
t<cr>
Transm
Fast=123<cr>
Set 2 Speed DFC Fast Value
OK
Slow<cr>
Transmit 2 Speed DFC Slow Value
100lb F
Slow=123<cr>
OK
Set 2 Speed DFC Slow Value
Fill<cr>
100lb F
Transmit 1 Speed DFC Value
Fill=123<cr>
OK
Set 1 Speed DFC Value
Trim<cr>
100lb TRM
Transmit DFC Trim Value
Trim=123<cr>
OK
Set DFC Trim Value
Accum(g)<cr> 1000lb
Transmit Accumulator Valid Selections
G/N/C/1-7
Accum(n)=100<cr> OK
Set
Accumulator
Ing(1)<cr>
1 100lb 1200lb
Transmit Ingredient (Bin,Fast,Slow)
Ing(1)=1,100,150<cr>
OK
Set Ing (Bin,Fast,Slow)
Trim(1)<cr>
100lb TRM1
Transmit Batcher Trim For Ing X
Trim(1)=100<cr>
OK
Set Batcher Trim
ID()<cr>
id(x)=r,1,2
List ALL IDs ID(ID)=Ref,Tare,Accum
ID(1)<cr>
id(1)=r,1,2
List A Single ID
ID(1)=ref,100,0<cr> OK
Add Or Replace An ID
Key(x)<cr>
Results of (x) function.
Performs function of (x) as if key was
pressed. See Valid Key Names.
<cr> = carriage return
8200-M538-O1
y 225 Installation
Page 100