Id storage operation, cont – Cardinal Industries 225 WEIGHT INDICATOR User Manual

Page 92

Advertising
background image

ID STORAGE OPERATION, CONT.

PERMANENT ID - Two Pass Transaction (Two-Step Operation)

The two-pass transaction is a two-step operation used to weigh the container once when it is

e

On the first step, the incoming weight will be

ing

ode, place the loaded container on the scale

e Setup).

ID) then

).

5. If two ID prompts are required, enter up to a 12 digit alphanumeric string for the second

are required press the ENTER key to proceed to the third

ired, press the ENTER key to store the weight. Proceed to

Step 8.

8. The indicator will return to the Gross weight display.

empty and once when it is loaded. A permanent ID string and a previously stored zero (0) tar
weight associated with that ID string are required. In the two pass transaction, the zero (0)
tare weight will be replaced by the new tare weight after the first pass and the stored weight
will return to zero (0) after the second pass.
stored and an interim ticket will be printed. On the second step, during the outgo
transaction, a complete ticket will be generated and the net weight will be added to the
permanent ID string accumulator.

Step 1 - Empty or Loaded Container With Three ID Prompts

1. With the indicator in normal operations m

2. Press the ID key. The display will change to show

ID1= (the Prompt 1 name entered

in ID Storag

3. Enter up to a 12 digit alpha-numeric ID string and press the ENTER key.

4. The display will momentarily show

REF= (and the name associated with the

change to

ID2= (the Prompt 2 name entered in ID Storage Setup

y If only one ID prompt is needed AND a ticket is desired, press the PRINT key to

store the weight and print the ticket. The display will show

Print Pass 1.

Proceed to Step 8.

ID prompt.

y If only two ID prompts are needed AND a ticket is desired, press the PRINT key to

store the weight and print the ticket. The display will show

Print Pass 1.

Proceed to Step 8.

y If three ID prompts

prompt.

6. The display will show

ID3= (the Prompt 3 name entered in ID Storage Setup).

7. Enter up to a 12 digit alphanumeric string for the third ID prompt.

y If a ticket is desired, press the PRINT key to store the weight and print the ticket.

The display will show

Print Pass 1. Proceed to Step 8.

y If a ticket is NOT des

8200-M538-O1

y 225 Installation

Page 88

Advertising