Dell PowerEdge FX2/FX2s - Manual (Page 146)

Clearing LLDP Counters
You can clear LLDP statistics that are maintained on an Aggregator for LLDP counters for frames
transmitted to and received from neighboring devices on all or a specified physical interface.
To clear LLDP counters, enter the clear lldp counters command.
Command Syntax Command Mode Purpose
clear lldp counters [interface] EXEC Privilege Clear counters for LLDP frames sent to and
received from neighboring devices on all
Aggregator interfaces or on a specified interface.
interface specifies a 10GbE uplink port in the
format: tenGigabitEthernet slot/port.
Debugging LLDP
You can view the TLVs that your system is sending and receiving.
To view the TLVs, use the following commands.
• View a readable version of the TLVs.
debug lldp brief
• View a readable version of the TLVs plus a hexadecimal version of the entire LLDPDU.
debug lldp detail
146 Link Layer Discovery Protocol (LLDP)