Dell PowerEdge FX2/FX2s - Manual (Page 52)

Field Description
• Internally propagated: ETS configuration
parameters were received from configuration
source.
ETS DCBx Oper status Operational status of ETS configuration on local
port: match or mismatch.
Reason Reason displayed when the DCBx operational
status for ETS on a port is down.
State Machine Type Type of state machine used for DCBx exchanges of
ETS parameters:
• Feature: for legacy DCBx versions
• Asymmetric: for an IEEE version
Conf TLV Tx Status Status of ETS Configuration TLV advertisements:
enabled or disabled.
Reco TLV Tx Status Status of ETS Recommendation TLV
advertisements: enabled or disabled.
Input Conf TLV pkts, Output Conf TLV pkts, Error
Conf TLV pkts Number of ETS Configuration TLVs received and
transmitted, and number of ETS Error
Configuration TLVs received.
Input Reco TLV pkts, Output Reco TLV pkts, Error
Reco TLV pkts Number of ETS Recommendation TLVs received
and transmitted, and number of ETS Error
Recommendation TLVs received.
Example of the show stack-unit all stack-ports all pfc details Command
Dell# show stack-unit all stack-ports all pfc details
stack unit 0 stack-port all
Admin mode is On
Admin is enabled, Priority list is 4-5
Local is enabled, Priority list is 4-5
Link Delay 45556 pause quantum
0 Pause Tx pkts, 0 Pause Rx pkts
stack unit 1 stack-port all
Admin mode is On
Admin is enabled, Priority list is 4-5
Local is enabled, Priority list is 4-5
Link Delay 45556 pause quantum
0 Pause Tx pkts, 0 Pause Rx pkts
Example of the show stack-unit all stack-ports all ets details Command
Dell# show stack-unit all stack-ports all ets details
Stack unit 0 stack port all
Max Supported TC Groups is 4
Number of Traffic Classes is 1
Admin mode is on
52 Data Center Bridging (DCB)