Dell PowerEdge FX2/FX2s - Manual (Page 82)

Debugging FIP Snooping
To enable debug messages for FIP snooping events, enter the debug fip-snooping command..
Task Command Command Mode
Enable FIP snooping debugging on for all or a
specified event type, where:
all enables all debugging options.
acl enables debugging only for ACL-specific
events.
error enables debugging only for error
conditions.
ifm enables debugging only for IFM events.
info enables debugging only for information
events.
ipc enables debugging only for IPC events.
rx enables debugging only for incoming
packet traffic.
debug fip-snooping [all
| acl | error | ifm |
info | ipc | rx]
EXEC PRIVILEGE
To turn off debugging event messages, enter the no debug fip-snooping command.
82 FIP Snooping