Dell PowerEdge FX2/FX2s - Manual (Page 231)

Configuring Storm Control
The following configurations are available only in PMUX mode.
1. To configure the percentage of broadcast traffic allowed on an interface, use the storm-control
broadcast [packets_per_second in] command from INTERFACE mode.
2. To configure the percentage of multicast traffic allowed on an interface, use the storm-control
multicast [packets_per_second in] command from INTERFACE mode.
3. To configure the percentage of unknown-unicast traffic allowed on an interface, use the storm-
control unknown-unicast [packets_per_second in] command from INTERFACE mode.
System Time and Date
The Aggregator auto-configures the hardware and software clocks with the current time and date. If
necessary, you can manually set and maintain the system time and date using the CLI commands
described in this chapter.
• Setting the Time for the Software Clock
• Setting the Time Zone
• Setting Daylight Savings Time
Setting the Time for the Software Clock
You can change the order of the month and day parameters to enter the time and date as time day
month year. You cannot delete the software clock.
The software clock runs only when the software is up. The clock restarts, based on the hardware clock,
when the switch reboots.
To set the software clock, use the following command.
• Set the system software clock to the current time and date.
EXEC Privilege mode
clock set time month day year
– time: Enter the time in hours:minutes:seconds. For the hour variable, use the 24-hour format; for
example, 17:15:00 is 5:15 pm.
– month: Enter the name of one of the 12 months in English. You can enter the name of a day to
change the order of the display to time day month year.
– day: Enter the number of the day. The range is from 1 to 31. You can enter the name of a month
to change the order of the display to time day month year.
– year: Enter a four-digit number as the year. The range is from 1993 to 2035.
Example of the clock set Command
Dell#clock set 12:11:00 21 may 2012
Dell#
Setting the Timezone
Universal time coordinated (UTC) is the time standard based on the International Atomic Time standard,
commonly known as Greenwich Mean time. When determining system time, you must include the
PMUX Mode of the IO Aggregator 231