AVer SEB5116 series - Manual (Page 104)

98
Name Function
(16) Find Next Search for the next event or changes in the motion detector frame. You can use
this when you are using Intelligent Search or Event Search function.
(17) Intelligent Search Search the changes in the motion detector frame (See also Chapter 6.4.1.3 ).
(18) Audio Enable/disable audio play
(19) De-interlace To enhance the video quality. Set the de-interlace mode to #1, if you are
capturing motionless picture and select #2, if it captures lots of movement.
6.4.1.1 To Cut and Save the Wanted Portion of the Recorded Video
1. Use the Playback Control buttons or drag the bar on the playback progress bar and pause on
where you want to start the cut. Then, click Segment to set the begin mark.
2. Use the Playback Control buttons or drag the bar on the playback progress bar and pause on
where you want to end the cut. Then, click Segment to set the end mark. To cancel
segmentation or set the segment marks from the start, click Segment button again.
3. Click Export >> Output Video Clip button to save the wanted clip.
4. In the Save As dialog box, locate on where you want to save the file or choose to Burn the video
segment to VCD/DVD ROM (only for .*mpeg file format).
5. Select the file type and select the camera information display position when playback. The
camera information will be the information of server name that user has defined in Network
Setting.
6. If the select the file type is *.avi, user can mark included audio to include audio in output video
segment.
i
The *.mpg format doesn ’t support audio output.
7. To adjust Video Quality if needed.
8. Click Save to save the video segment.