AVer SEB5116 series - Manual (Page 77)

71
4.3.5 To Search Using the Visual Search
1. Click Visual Search.
2. In the Visual Search Setting dialog box, select the Camera number and the date. Then click OK.
3. When a series of frames appear by date, click on the frame to display another series of frames
and search by every Hour of that date, every 3Minutes of that hour, every 10 Seconds of that
minute, every Second of that 10 seconds. To go back, click
. To view from the selected
frame and close event search, click .
4.3.6 To Search Using the Event Search
1. Click on the video screen on where you want to search.
2. Click Event Search. The Event Search text (red) would appear at the lower left corner of the
screen.
3. In the Event Search Setting dialog box, check the type of condition you want to search. If you
select POS, in the Find Text box, type the word. Then, click OK to start searching. The video
search would stop at the frame that matches the condition. To keep on searching click Find
Next (
) button.
4. You may also set to search and list all the result. Mark Output Event List box and in the
Search Duration section, set the Begin Time and End Time. Set the Searching Interval time
that system won
’t list out the same events in a period of time that user has setup. Then, click OK
to start searching
5. When the Event list appear, click and select the item you want to view.
6.
When the Event list appear, click and select the item you want to view.