AVer SEB5116 series - Manual (Page 28)

22
5. The hard disk must be formatted before user can use it to record the video. Following the below
steps to format the hard disk.
Before starting hard disk format, please stop all operations on the DVR server.
a. Click to call out SETTING MENU.
b. Click System → System and click Next.
c. Click Refresh button to detect the installed hard disk.
d. Select the hard disk that user wants to format it.
e. And then, click Format to start formatting.
6. Setup the date and time in order to have correct system time and date. Following the below
steps to setup date and time:
a. Click and select System → System and click Next.
b. In Time section, click Setting button of System Time.
c. Select the date and adjust the time, and then, click OK.
7. Setup the Schedule to record.
a. Click → Setting → Schedule → System
b. Select the date and type of record (Weekly, Month, or None).
c. And then, select the week day (Sun. ~ Sat.) and hours (00 ~ 23) by click the week day and
hours table.
d. Click Save and click Record tab.
e. Select the record mode (Always, Motion, Sensor, or Smart) and date.
f. And then, select the week day (Sun. ~ Sat.) and hours (00 ~ 23) by click the week day and
hours table.
g. Click Save and OK to complete the record schedule setting.
8. To start recording, click (record) button.
2.2.1 Using the Virtual Keyboard
Use the Virtual Keyboard and mouse to configure the DVR system. Just click or select
the column and right-click to call out the virtual keyboard. For uppercase, click Caps button. To exit,
click left-click anywhere on screen.