AVer SEB5116 series - Manual (Page 73)

67
Name Function
(6) Archive To select the video file source for playing.
– DVR Recorded File (HD): To playback the recorded video from the hard
disk which was recording video on the DVR system. (see also Chapter
4.3.2 )
– Backup File(.dvr): The file is backup and save in *.dvr file format. (see
also Chapter 4.3.3 )
– Backup File (.avf): The file is backup and save to external USB storage
device in *.avf format. Select the file source folder and click OK to playback
(SEB series don
’t support *.avf file format).
(7) Status bar Display the recorded date, time and play speed.
(8) Camera ID Show the number of cameras that are being viewed. When you are in single
screen mode, click the camera ID number to switch and view other camera.
(9) Language To switch DVR application UI language.
(10) Adv. Function Advanced function is including :
HDD Backup: to call out HDD Backup application. (see also Chapter 4.3.4 )
iEnhance: to call out iEnhance application. ( see also Chapter 6 )
AVF to AVI: save *.avf file format as *.avi file format (SEB series don ’t
support *.avf file format).
(11) Export Export includes Snapshot, Print, and Output Video Clip function.
Snapshot: Capture and save the screen shot either in *.jpg or *.bmp
format.
Print: Print the screen shot.
Output: Save the segmented file in *.avi format
(12) Segment Keep a portion of the recorded video (see also Chapter 4.3.1 )
(13) Full screen Use the entire area of the screen to only display the video. To return, press the
right button of the mouse or ESC on the keyboard.
When you switch to full screen in multiple-screen mode, Left click to toggle to
only display one of the video in the multiple-screen mode or all.
(14) Visual Search
Search from a specific camera by Date, Hour, Minute, 10 Seconds and
Second(see also
Chapter 4.3.5 )
(15) Find Next
Search for the next event or changes in the motion detector frame. You can
use this when you are using Intelligent Search or Event Search function.
(16) Event Search
Search from the recorded activities that take place in the system (i.e., Sensor,
Motion, Video Loss, POS)(see also
Chapter 4.3.6 )
(17) Intelligent Search Search the changes in the motion detector frame (See also Chapter 4.3.7 )
(18) Sound /Sound bar
Turn on and off the sound
Increase and decrease the volume
(19) De-interlace
To enhance the video quality. Set the de-interlace mode to #1, if you are
capturing motionless picture and select #2, if it captures lots of movement.