AVer SEB5116 series - Manual (Page 14)

8
Name Function
(11) Number buttons
~
- Channel camera selection number in
playback and preview mode. For the channel
over 10, press , then press
~
- Press button can switch to
different screen display modes ( ~
).
- Press and number button, to set
the preset position in the PTZ mode.
A functional key for multiple system control. Press to
enable multiple function modes and the button will
light up blue. To exit multiple function modes, press
again.
+ : Switch to single screen display mode
+ : Switch to QUAD display mode
+ : Switch to 9 spilt screen display mode
+ : Switch to 16 split screen display
mode
+ : Switch to one single and 7 + 1 spilt
screen display mode
+ : Switch to one single and 12+ 1 spilt
screen display mode
+ : Enable/disable channel auto switch
cycle
(12) USB 2.0 port
2 x USB 2.0 ports for connecting USB device, ex: USB pen drive, external hard
disk, mouse…and so on.
(13) To playback video at faster speed
(14)
To pause playback
To start playback
(15) To rewind the recorded video
(16) Set a video segment to playback repeat(see also Chapter 1.2.2.1 )
(17)
To backup recorded video file to USB storage device(pen drive or external hard
disk) and DVD-ROM.