AVer SEB5116 series - Manual (Page 90)

84
b. Retrieve time: set the waiting duration before system switching back to original Preview
mode. If the retrieve time is un-mark, the alarm video will keep enlarging until user switch
back to Preview mode manually.
- Relay Output
Set to enable/disable the relay operation when the alarm is activated and to extend additional
time in second before it stops the relay operation. In the Relay Setup dialog box, mark from
the available relay list; set to enable/disable the relay operation when the alarm is activated.
Set the Retrieve time, you may to extend the relay operation time and set the duration in
second. Click OK to exit and accept the setting and Cancel to exit without saving the setting.
- Play Warning Sound
Play alarm sound. Set the time duration in seconds.