AVer SEB5116 series - Manual (Page 56)

50
3.3 Recording Setup
i
In Select Cameras, SEB5108H series only has 8 channels will be available.
(1)
(2)
(3)
(1) Camera Icons
Select the camera number you want to set the recording setting. To select all the cameras, mark the
Select All check box. To select more than one camera, Right click on the camera icon. To select
one camera only, Left click on the camera icon. The camera icon turns purple when it is selected.
- Audio Record: Enable/disable to record audio while recording.
(2) Total Frame Rate & Surplus Frame Rate
- Total Frame Rate value is depending on the video system that is using.
- Surplus Frame Rate value is related to record mode and frame rate of channel that has
setup.
(3) Recording Parameter
- Resolution: click the radio button () button to select the record mode – D1, CIF, or HD1.
Under D1 mode, the video recording is in full screen resolution. Each channel is recorded
only at a maximum frame rate. Whereas in CIF mode, video recording is at a lower
resolution. In HD1 mode, total recording frame is 60/50fps (NTSC/PAL). User can switch to
view the video in full screen or QUAD screen.
- Max Frame Rate: Set the maximum number of frames to be recorded in Smart recording
mode. The higher the frame rate, it uses more hard disk space.
i
The minimum value of max frame rate is 2.
- Min Frame Rate: Set the minimum number of frames to be recorded during motion and
motionless state. The higher the frame rate, it uses more hard disk space.
- Video Quality: Adjust the video quality. The higher the value, the lower the compression
level and uses more hard disk space.