AVer SEB5116 series - Manual (Page 106)

100
6.4.1.3 To Search Using the Intelligent Search
1. Click on the video screen on where you want to search.
2. Click Intelligent Search. The Intelligent Search text (red) would appear at the lower left corner
of the screen.
3. When the Intelligent Search Setting dialog box and motion detector frame appear, you may
adjust the sensitivity bar and the motion detector frame size and location. To set motion detector
frame size and location, left click and drag on the screen. Then, click OK to start searching. The
video search would stop at the frame that matches the condition. To keep on searching click
Find Next( ) button.
4. You may also set to search and list all the result. Mark List box and in the Search Duration
section, set the Begin Time and End Time. Set the Searching Interval time that system won ’t
list out the same events in a period of time that user has setup. Then, click OK to start searching.
The search result will show as below figure: