AVer SEB5116 series - Manual (Page 92)

86
- Start Recording
Record the video from the selected camera.
1. In Recording Cameras, select the camera to enable/disable video recording. Mark All to
select all cameras.
2. In the Frame Rate selection, select As Setting to record the number of frames based on
the Recording Setting or Max to record the maximum of frames based on the available
speed.
3. In the Start Recording prior text box, mark and set the number in second for the DVR
system to pre-recording before the alarm happen.
4. In the Stop Recording after text box, mark and set the number in second for the DVR
system to continue recording after the alarm has ended. If user doesn
’t mark and set the
time, the alarm recording will continue recording until alarm is reset.
5. Click OK to complete the setting.
i
SEB5108H series only has 8 channels will be available.