AVer SEB5116 series - Manual (Page 93)

87
- PTZ Preset Point
Position the PTZ camera based on the preset point setting.
1. Next to the PTZ preset point check box, click Detail.
2. In the PTZ Setup dialog box, select the PTZ camera number in Select Camera. And then
mark the Enable check box.
3. In Preset Number section, select the Alarm Trigger and Alarm Close of the PTZ camera
when the alarm is activated and ended. User also can select Auto Pan group as alarm is
activated and ended.
i
SEB5108H series only has 8 channels will be available.
- Send to CMS
Select the camera to enable/disable sending the video to CMS (Central Management System,
ex: CMS3000). To select all cameras, mark All check box.
i
SEB5108H series only has 8 channels will be available.